BMKNW - AO 1900 TYPE 1 WALL & FLOOR CERAMIC ADHESIVE
- MSDS: BMKNW
- Manufacturer: AMERICAN OLEAN TILE CO
- Product Name: AO 1900 TYPE 1 WALL & FLOOR CERAMIC ADHESIVE
- National Stock Number: 8040-00F020891
Product Identification
Product ID:AO 1900 TYPE 1 WALL & FLOOR CERAMIC ADHESIVE
MSDS Date:03/01/1990
FSC:8040
NIIN:00F020891
MSDS Number: BMKNW
Responsible Party
LANSDALE, PA 19446-0271
Emergency Phone: (215) 855-1111
Info Phone: (215) 855-1111
Cage: 7P894
Contractor
Telephone: 215-855-1111
Cage: 7P894
Ingredients
STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 4-7%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM; 9293
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 1-2%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
11
RTECS: 9999999WG
118 G/L-197 G/L
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. INHALATION:
RESPIRATORY TRACT IRRITATION, HEADACHE, NAUSEA, & DIZZINESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITATION. INHALATION: RESPIRATORY
TRACT IRRITATION, HEADACHE, NAUSEA, & DIZZINESS.
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INGESTION: INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:>200F
Accidental Release
Spill Release Procedures:SCOOP MATERIAL INTO DOT APPROVED CONTAINER.
REMOVE TO SAFE PLACE WHERE MATERIAL CAN DRY.
Handling
Handling and Storage Precautions:CLOSE CONTAINER AFTER EACH USE. DON'T
REUSE CONTAINER.
Other Precautions:AVOID SKIN & EYE CONTACT. USE ONLY AS DIRECTED ON
LABEL. KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Ventilation:OPEN DOORS & WINDOWS, UTILIZE OTHER MEANS TO ASSURE FRESH
AIR ENTRY & EXHAUST.
Protective Gloves:RECOMMENDED
Eye Protection:GLASSES
Work Hygienic Practices:WASH SKIN THOROUGHLY W/SOAP & WATER OR HAND
CLEANER.
Supplemental Safety and Health
BOILING RANGE: 212-400F.
Chemical Properties
Boiling Pt:B.P. Text:SEE SUPP.
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:A SLIGHT ODOR OF AMMONIA & LATEX MAY BE PRESENT
UNTIL ADHESIVE DRIES.
Percent Volatiles by Volume:45-55%
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT OR COLD
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. DON'T FLUSH ADHESIVE DOWN DRAIN.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.